German Oilfield Equipment & Services

Rental Equipment

Besides new manufactured oilfield equipment we offer also rentals and have surplus equipment for sale. Whereas often rental equipment can also be purchased. Please find below the links showing the equipment and parts we currently have available. This list is updated continiously, so please watch it regularly that you do not miss anything what might be interesting for you.

Batch Mixer

2 x 10m³ Premix Tank

The 20 m³ Batch Mixer is available for rental/Sales in good conditions and with economical price, which is heavy-duty skid mounted for easy transportation and efficient cementing job

Batch mixer 1
  • Electrically driven
  • Mixing Paddles inside mixing tanks
  • Charge pump: Mission
  • All connections: WECO
  • Circulation manifold included

Tank: 2 x 10m²

Bulk cement line: 3″

Sunction line: 4″

High Pressure line: 2″ 1502

For further information please contact Henning Bartels at

+49 (0) 5376 – 976 47 11
sales@goes-well.com

Multi Purpose Pumping Units

3.5 million BTU in-line heater and 10.000 psi triplex pump

The 500 HHP Multi Purpose Pumping Unit “MPPU” is available for rental to heat and pump various fluids, suitable for mix and squeeze acid systems, gravel-packs, consolidation, dewaxing and tensioactive treatments.

Hot Oiler
  • Pump rate: 20-600 l/min
  • Heating oil, condensate or water on the fly and reduce treating time and cost drastically
  • Stainless steel construction and 12 speed pump operation allows all types of acid jobs
  • Magnetic flowmeters and modern data acquisition
  • Paraffin dispersant in wellbores and pipelines
  • All type of Well stimulations
  • Well treatments with all types of solvents
  • Pump and circulation operations
  • Filtration system installed
  • CE certified

Carrier Vehicle

Volvo FMX 500 6×4
Engine power (V6) : 500 PS
Maximum technical axle load: 9/9/13 t


Dimensions

Length: 11.5 m
Width: 2.5 m
Height: 3.9 m
Total Weight: 22.0 ton


Main Components

Triplex pump: SPM TWS 600
Transfer case: NAMCO 2 speed
Centrifugal pump: Mission 6“x 5“
Loading pump: Roper 3“
Heater: 3.5 million BTU
Data acquisition: included
Tanks: 2 x 3 m³ stainless steel

For further information please contact Henning Bartels at

+49 (0) 5376 – 976 47 11
sales@goes-well.com

Container Pump

Compact Design Certificated for Offshore Use

The container mounted pump is fluid pump mounted in standard 20’ container, which is ideal for performing high pressure well service treatments. Compact design and construction ensure operation and transport safety and comfortable. This unit is built in Germany with all certification ready for offshore use.

Container Pump
  • Pump rate: 30-1000l/min
  • 7 speed Allison transmission
  • All type of well treatments
  • Fluid pump operations
  • Remote control
  • DNV certified
  • CE compliance
  • Atex compliance pump

Dimensions

Length: 6.058 mm
Width: 2.434 mm
Height: 2.591 mm
Total Weight: 10.000 kg


Components

Desiel Engine: Caterpillar C13 / 475 BHP
Triplex Pump: Serva TPD 600
Transfer Case: Allison OFS47000
Centrifugal Pump: Mission 6“ x 5“
Data Acquisition System: included

For further information please contact Henning Bartels at

+49 (0) 5376 – 976 47 11
sales@goes-well.com

High Rate Heating Unit

Heating up to 7 million BTU

This high rate heating unit is designed to heat and pump various fluids used in harsh oilfield operation. It equipped with mission pump for circulating, Roper pump for transferring and operator cabin. This unit is available for rental now.

High_Rate_Heating_Unit
  • Compact design for efficient operation
  • Heating capacity : 7 million BTU (2050kW/hr)
  • 90 m 3 / hour heating ( from 5 o c to 23 o c)
  • Heated operator cabin
  • Circulate rate: +/- 200L / min

Carrier Vehicle

Compact SKID mounted with operator cabin


Components

Diesel engine                         CAT 90HP C4.4

Centrifugal Pump                       Mission 4“x5“

Loading Pump                                  Roper 3“

Heater                                       7 million BTU

Fuel Tanks                                            5000L

For further information please contact Henning Bartels at

+49 (0) 5376 – 976 47 11
sales@goes-well.com

Water Filtering Unit

Heavy-duty SKID for filtering 40-60 m3 / hour

The SKID mounted filter unit is compact skid design for filtering water on oilfield service. The unit is equipped with diesel engine. It’s available for rental now.

Water Filtering Unit
  • Transport on trailer or flatbed truck
  • 24kW Hatz diesel motor
  • Parallel, double pod design for efficient opperation
  • Choice of different filters avaliable
  • Up to 60 m3/ hour filtering capacity (with clean source water)
  • Reservation place for hoses
  • Toolbox

Carrier Skid

Heavy Duty SKID Frame


Dimensions

Length: 3.000 mm
Width: 1.800mm


Main Components

Diesel Engine: 24kW Hatz
Centrifugal Pump: Type R27-125S-270
Secondary Filter: 2 / 5 microns
Manifold: 6 pcs
Butterfly Valve: 4“

For further information please contact Henning Bartels at

+49 (0) 5376 – 976 47 11
sales@goes-well.com

Heating & Filtering Unit

3.5 million BTU Heater + 90 m3 /hour Filtering

The combination heating & filtering unit is a combination design to treatment of oilfield water for both: filter and heat. The unit can work as heater alone, filter alone, or combination of heater and filter. This unit is available for rental now.

Heating and Filtering Unit
  • Parallel, double pod design for efficient operation
  • 90 m3/hr filtering with normal field water
  • 3.5 million BTU (1.025 kW/hr) heater unit
  • 45 M3/hr heating (from 2o C to 20o C)
  • Engine pre-heating

Carrier Vehicle

Compact Chassis: Mercedes-Benz 4 x 4
Emission: Euro IV


Dimensions

Length: 6.014 mm
Width: 2.417mm
Height: 2.853 mm


Components

Heater: Gentex 35M Texheater
Filters: 1-5 micron

For further information please contact Henning Bartels at

+49 (0) 5376 – 976 47 11
sales@goes-well.com

Support Pumping Container

Compact Design for High Pressure Pumping

The 500hp Pump unit is mounted inside the 20’ container and designed for operations in rough oilfield environments. Each component of the pump unit is selected to provide optimum performance, considering operating conditions and serviceability, which is available for rental now.

Support Pumping Unit Container
  • For high pressure pumping or fluid circulation
  • Support different type of well service interventions
  • Used for high-pressure liquid carbon dioxide pumping,acidizing, cementing operations, pressure testing, etc.
  • Engine pre-heaters for extreme weather conditions
  • Remote control
  • CE conformity

Dimensions

Length: 6.100 mm
Width: 2.460 mm
Height: 2.700 mm
Total Weight: 13.000 kg


Components

Diesel Engine: C15   444 HP @ 2.100rpm
Triplex Pump: SPM TWS 4.5“
Transfer Case: Allison OFS47000

For further information please contact Henning Bartels at

+49 (0) 5376 – 976 47 11
sales@goes-well.com

Nitrogen Tank Skid

2.000 Gallons Nitrogen Storage Tank

The skid mounted Nitrogen tank is Cryogenic Offshore Vessel, suitable for storage Nitrogen for easy operation and safety transportation.

Nitrogen Tank Skids
  • Inner vessel material: 304/304L stainless steel
  • Outer vessel material: ST52
  • Super insulation
  • NER (Normal Evaporation Rate): 0.60 N2% / day maximum
  • Third party certification available
  • DNV certified

Dimensions

Length: 3.645 mm
Width: 2.435 mm
Height: 2.590 mm
Total Weight: 29.050 kg


Components

Capacity: 8.4 m3
Maximum Working Pressure: 3.1 bar
Design pressure: 5.33 bar
Design Temperature Inner Vessel: -196 °C
Design Temperature Outer Vessel: +50 °C

Design Ref.   DNV 2.7-1 / EN 13458

For further information please contact Henning Bartels at

+49 (0) 5376 – 976 47 11
sales@goes-well.com

Injector Frame

10 m Base Frame for Injector HR 660 & Other Types

The Injector Frame is four sections design, detachable to meet the requirements of domestic transportation, easy installation and removal, which is available for rental or for sales.

Injector Frame
  • Material S355J2G3 (including certificate of impact energy at -40°C)
  • Abrasive blasted and with industrial painting „two components”(1 coating, colour strength min 120 µm), RAL 5015
  • Press welded gratings with zinc coating
  • Including  handrails
  • Two ladders (with fixed and movable part)
  • Lifting equipment / safety is available
  • Adjustable in 2.000 mm height via a locking bolt

Transport Dimensions

Length: 9.530 mm
Width: 2680 mm
Height: 3.400 mm
Total Weight: ~ 10.000 kg


Dimensions

Bridge: 6.320 x 2.585 x 3.220 mm
Intermediate Frame: 2.700 x 2.500 x 2.500 mm
Mounting Frame (on the top): 2.700 x 2.500 x 2.500 mm
Injector Mounting Frame: 3.150 x 3.120 x 650 mm

For further information please contact Henning Bartels at

+49 (0) 5376 – 976 47 11
sales@goes-well.com